RECEIVERS

682

DATE OF DESIGN

FREQUENCY RANGE

89 to 95 MHz with Type 682 Tx 7AM AP 27944 and CDK Receiver P40 AP 7945A
65 to 85 MHz with Type 682M Tx 7AM AP 53175 and CDQ Receiver P40 AP56187A

WHERE USED/FITTED

It is used on handcarts, vehicles, and other craft as the main or supplementary equipment. It may be installed with or without remote control and may be set up for SIMPLEX or DUPLEX working.
It is crystal control and operates [TX and RX] on pre-determined spot frequencies.
Power requirements are LT 12V @ 3 AMPS/HT 330V @200mA DC. The microphone and modulator require 4V @ 30-40mA DC.
Power output was 7 - 10 Watts.
A station set up to use Type 682 and outfit CDK or Type 682M and outfit CDQ, requires, in addition, one or more of the aerial outfits AGU, AGY, AGW, AGP or AGO, which are supplied separately, and one or more of the following outfits:-
Control Outfit KSC - for simplex working only.
Control Outfit KSD - for duplex working with NO LINKING outfit employed.
Control Outfit KSF - for duplex working WITH a LINKING unit employed - this outfit is required where the AUDIO input and output are to be extended for other purposes e.g. connection with a field telephone exchange or relaying through another circuit.
Aerial Switching Unit Outfit ESC - for simplex working only.
In its time [1945] this set can either be thought of as 'simple' or 'very sophisticated', the latter having every conceivable device option fitted to the Type 682/Type 682M. The FACILITIES available were as follows:-
Simplex - Available with either local or remote positions. In both instances HT switching of the transmitter is carried out by means of the pressel switch in the handset.
Duplex - Operation is available with either local or remote positions. HT switching of the transmitter is or is not possible at the handset according to the outfit used. With duplex operation, the radio station can be connected to a field telephone exchange so that any extension of this exchange can speak over the radio link.
Teleprinter - Teleprinter operations of a duplex link is possible. This requires a teleprinter, teleprinter terminal unit, teleprinter rectifier unit and an S + DX MkII in addition to the outfits described.
Relay - Where 2 complete installations are fitted in close proximity to one another, as in Radio Van 29, the installation may be linked together so that what one station receives can be re-radiated on the other circuit and vice versa.

IMAGES, PHOTOS, DOCUMENTS, SCHEMATICS ETC.

Wiring and Connections
Block Diagram
Duplex Linking Station - Connections
Image